Seed Paper Mould and Deckle: How to Make Your Own Sheets
Share
A seed paper mould is a screen stretched over a frame that you dip into watery paper pulp. It lifts out a thin, even layer of pulp, and the deckle is a second, loose frame that sits on top to give the sheet clean, straight edges. Add seeds before the sheet dries, and you have paper that grows into plants. You can buy a mould and deckle, or build one from scrap wood and window screen in about twenty minutes.
Below you will find what you need, the steps, the mistakes that ruin a batch, and how to plant the result. If you would rather send a finished card than spend a weekend with a blender, our plantable greeting cards are made in Canada from 100% post-consumer recycled paper and arrive ready to write in and plant.
TL;DR
- A mould is a screen on a frame that catches pulp. A deckle is a loose frame on top that shapes the edges. A single frame with screen also works.
- Tear recycled paper, soak it for a few hours or overnight, blend it until soupy, then stir the seeds in by hand at the end.
- Dry the sheet quickly and flat, since seeds that sit wet for too long will start to grow.
- Plant the finished paper under a thin layer of soil, in a sunny spot, and keep it watered.
- For cards and gifts that are ready to send, we make plantable cards from recycled paper with non-GMO, non-invasive seeds.
Table of Contents
- What a mould and deckle actually do
- What you need
- Choosing seeds that suit paper
- How to make seed paper, step by step
- No blender? Make pulp by hand
- How to plant your seed paper
- Common problems and quick fixes
- When a homemade sheet is the right choice, and when a finished card is
- A word from us
- Plantable cards, ready to send
- FAQ
- Sources
What a mould and deckle actually do
Handmade paper is just fibres floating in water. The mould is how you catch those fibres. As the Museum of Fine Arts Boston explains it, the mould has screening on top that forms the base, while the deckle is a loose frame placed over it to shape each sheet and create straight edges.
Think of it as a sieve with a border. You slide it under the pulp, lift it up flat, and water drains through the screen while the fibres stay behind as a sheet. The deckle keeps the pulp from spilling over the sides and gives you a neat rectangle.
Do you need a deckle at all?
Not really. The same museum notes that a deckle is optional for home papermaking: one frame, or even a styrofoam tray with window screen, will work, and you trim the edges with scissors once the paper is dry. If you want clean card-sized sheets without trimming, a deckle helps. If you are making a few bookmarks with children, a single screen is plenty.
Buying versus building
Mother Earth News describes a deckle kit bought online for US$9.99. It has a wooden frame, a plastic grid about an inch thick that fits inside, and a fine screen. The same article says you can build a simple frame from four dowels or narrow wood trim in any size, from a 4×6 postcard to 8×10 paper.
Building one is simple. Kew’s Grow Wild guide suggests four pieces of wood in a square or rectangle with muslin cloth stapled to it. Scouts Canada uses a different version: window screen material and a small embroidery hoop, which makes a round sheet.
Pick the size by what you want to make:
- Postcard or gift tag (about 4×6 inches): small frame, thin pulp, quick to dry.
- Greeting card (about 5×7 inches): medium frame, and a medium pulp that is still strong enough to write on.
- Bookmarks or plant markers: any small frame, or cut a larger sheet down once dry.
If you want to browse tools and extras in one place, you can find paper craft supplies and kits from independent makers and designers.
What you need
The supply lists from Canadian and international sources overlap a lot. Here is the shared core:
| Item | What it is for | Notes |
|---|---|---|
| Plain recycled paper | The fibre | Nature Canada suggests newspapers, magazines or envelopes. Avoid glossy sheets. |
| Large bowl or tub of water | Soaking and pulp bath | Warm water softens paper faster. |
| Blender | Breaks paper into pulp | You can do it by hand (see below). |
| Mould, and a deckle if you like | Forms the sheet | Bought or built. |
| Seeds | The growing part | Small, flat seeds work best. |
| Towels, felt or old cloth | Absorb water | Flat surface for drying. |
| Sponge | Presses out water | Helps the sheet dry faster. |
Scouts Canada’s version also uses a baking pan of about 23 cm × 33 cm to hold the pulp, which gives you room to dip a hoop or small frame.
Choosing seeds that suit paper
Nature Canada recommends seeds that are flat and small, ideally native to your area, and suggests asking your local field naturalist club for ideas. Small seeds sit inside thin paper without making it lumpy. Large seeds punch through the sheet and leave holes.
The Museum of Fine Arts Boston chose non-GMO, neonicotinoid-free native wildflower and meadow seeds to attract birds and protect pollinating insects. That is a good standard to copy. Check the packet for the words non-GMO and untreated, and pick a mix that suits your region.
A few other points:
- Mother Earth News uses saved sunflower, squash, pumpkin and pepper seeds as well as expired seed packets. Those make good garden paper, though they are larger and lumpier than wildflowers.
- Be careful with invasive species. A mix labelled “wildflower” is not always native or safe for your region. We wrote about this in our guide to native seed paper in Canada.
- If you plan to write on the paper with a pen, stay with small seeds and a medium-thick sheet so the surface is smooth enough.
How to make seed paper, step by step
The methods from Scouts Canada, Nature Canada, the Museum of Fine Arts Boston and Mother Earth News agree on the main moves. Here they are in order, with where each one tends to go wrong.
1. Tear and soak the paper
Rip the paper into small pieces. The Museum of Fine Arts Boston suggests about 1-inch pieces. Scouts Canada uses about 1½ cups of tiny pieces per sheet. Soak them in warm water for a couple of hours or overnight. Soaking is the step people rush, and rushed paper makes lumpy pulp.
2. Make the pulp
Blend the soaked paper with fresh water until it looks soupy. The Museum of Fine Arts Boston uses about two cups of water, and notes that more water gives a thinner paper. Mother Earth News blends four or five sheets of coarsely torn paper with enough water to cover it, and uses the pulse button to control the texture.
A rough guide:
- Thicker pulp gives a sturdier, more textured sheet, good for tags.
- Thinner pulp gives a more delicate sheet, but it can tear when you plant it or write on it.
3. Add the seeds by hand
Stir the seeds in gently after blending, never in the blender, because the blades can crack them. Some methods sprinkle the seeds on top of the wet pulp instead. Scouts Canada sprinkles them on and pats them in. The Museum of Fine Arts Boston sprinkles with dry fingers over the wet pulp. Either way, work quickly so the seeds spend as little time wet as possible.
4. Form the sheet
Pour the pulp into a shallow pan or tub. Scouts Canada fills a baking pan about a quarter full. Slide the mould in, screen side up, and the Museum of Fine Arts Boston suggests holding it at a 45-degree angle as you scoop. Lift it out level, and let the water run through.
If you use a deckle, set it on top of the mould before you dip. Lift both together and remove the deckle once the water has drained.

5. Press out the water
Dab the back of the screen with a sponge or press it with a towel. Nature Canada raises the screen and dabs out the water. The Museum of Fine Arts Boston flips the sheet onto felt or a towel, a move called couching, and sponges more water out. The drier the sheet before it goes to dry, the lower the risk of seeds starting to sprout.
6. Dry it flat and fast
This is where batches fail. Kew’s Grow Wild guide says that drying seed paper quickly is essential, otherwise the seeds will start to grow. Give the sheet a warm, airy spot.
Drying times differ by method:
- Scouts Canada and Nature Canada both say at least 24 hours.
- Mother Earth News dries the sheet over two days and stacks books on top near the end to stop curling.
- The Museum of Fine Arts Boston dries for a few days, flipping the sheet after the first day.
Nature Canada adds a heavy object on top for the last couple of hours to flatten the sheet.
7. Trim and use
Once the paper is fully dry, trim the edges with scissors if you made it without a deckle. Cut it to card size, write your message, and tuck it in an envelope. Keep the finished paper somewhere dry.
No blender? Make pulp by hand
You do not need one. The U.S. agency NESDIS explains that you can soak the torn paper in a bowl for a few hours or overnight, then massage and squeeze it with your hands until it no longer looks like paper. Drain the extra water, add the seeds, spread the pulp over a screen, press it flat, and let it dry before planting.
The pulp will be a bit coarser, so aim for a thicker sheet. It suits plant markers and rustic gift tags better than a card you plan to write a long message on.
How to plant your seed paper
Planting is simple, and it is the part children enjoy most. Scouts Canada plants the paper flat under about 1 cm of soil and waters it. Kew suggests a small pot, a light covering of compost (not too much, or the seeds will not get sunlight) and a good watering in a sunny spot. The Museum of Fine Arts Boston advises a sunny location under a little soil, keeping seedlings watered until they are 6 inches tall, then whenever the soil feels dry.
In short:
- Choose a pot or a sunny garden bed.
- Lay the paper flat and cover it lightly with soil.
- Water well, and keep the soil damp until seedlings appear.
- Move seedlings outside only when your local weather is settled and frost has passed.
Our seed paper planting guide and our notes on planting seed paper in soil go into more detail. If children are helping, seed paper for kids has activity ideas and safe planting tips.
Common problems and quick fixes
- The sheet falls apart when lifted. The pulp is too thin or the paper was not soaked long enough. Add more paper or blend a little longer.
- Seeds sprouted on the drying rack. The sheet dried too slowly. Press out more water and dry in a warm, airy spot.
- The sheet curls. Put a book or heavy object on top for the last hours of drying, as Nature Canada and Mother Earth News both do.
- The surface is too bumpy to write on. Use smaller seeds, or write your message on a plain blank card and attach the seed paper as a tag.
- Lumpy pulp. Soak longer, or blend in short pulses.
When a homemade sheet is the right choice, and when a finished card is
Making seed paper is a lovely afternoon with children, a school project or a craft night. It gives you a personal result, and the mould and deckle are reusable.
If what you really want is a card to give, though, the work around the paper adds up: soaking, blending, drying for a day or more, trimming, choosing safe seeds and finding an envelope. That is where a finished card saves the time. Ours are blank inside for your own note, come with a recycled kraft envelope and are packed and shipped without plastic.
A word from us
We started Greet n’ Grow because a card usually gets read once and then goes in the bin. We wanted the card itself to be a gift that keeps going.
That is why our cards are made in Canada from 100% post-consumer recycled paper, with non-GMO, non-invasive seeds for flowers, herbs or vegetables. The message is yours, since every card is blank inside, and the person who gets it can plant it and watch something grow.
If you enjoy making seed paper at home, we love that. A mould and deckle is a lovely way to learn how it all works. And if you need a card for a birthday, a wedding or Valentine’s Day, we have already done the soaking, the drying and the seed choosing, so you can spend your time on the words.
Trevor
Plantable cards, ready to send
When the occasion is coming and you want something thoughtful in the mailbox, browse our full range of plantable greeting cards. For weddings there is a plantable wedding card collection, and for February we have seed paper Valentines. A few favourites for birthdays and congratulations are the Robot Birthday Card, the Happy Birthday You Old Prune Card and the Congratulations Card With Dill.
Each card is made from 100% post-consumer recycled paper and shipped in plastic-free, compostable packaging. Bundles and themed packs are available if you send cards often or give them as business gifts.
FAQ
What is the difference between a mould and a deckle?
The mould is the frame with a screen that catches the pulp and drains the water. The deckle is a loose frame on top that keeps the pulp in a neat rectangle and gives straight edges. For simple home projects, a single frame with screen is enough, and you can trim the edges afterward.
Can I make seed paper without a blender?
Yes. Soak torn paper for a few hours or overnight, then squeeze and massage it by hand until it turns to mush, as NESDIS describes. Drain the water, mix in the seeds and press the pulp onto a screen. The sheet will be a little coarser than blended paper.
How long does seed paper take to dry?
Plan on at least 24 hours, according to Scouts Canada and Nature Canada, and up to a few days for thicker sheets. Dry it flat in a warm, airy place, because slow drying can start the seeds growing, as Kew’s guide warns.
Which seeds work best in seed paper?
Choose small, flat, non-GMO seeds, ideally native to your region. Nature Canada suggests asking your local field naturalist club for ideas. Avoid large seeds that break through the sheet.
How do I plant seed paper?
Lay the dry paper flat on moist soil, cover it with a thin layer of soil, and water well. Keep it in a sunny spot and keep the soil damp until the seedlings appear. Scouts Canada uses about 1 cm of soil.
Sources
- Make your own wildflower seed paper, Grow Wild, Kew
- Seed Paper, Scouts Canada
- 6 steps to making your own seed paper, Nature Canada
- Handmade Paper, Museum of Fine Arts Boston
- How to Make Seed Paper at Home, Mother Earth News
- Activity: Make Seed Paper, NESDIS
